Processing Machinery
3 조회수
PMMA Bonding Bubbles and Whitening
문제 현상
Bonded products show bubbles and whitening at the bonding surface, and bonding strength is also affected.
원인 분석
Unclean bonding surfaces or improper operation seal air into the adhesive layer; rapid evaporation of the adhesive also causes whitening and bubbles.; During on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based on experience alone.
해결 방법
①Thoroughly clean the bonding surface; ②standardize glue application and lamination operation; ③post-cure at constant 60℃ for 2 hours after bonding; ④select a matching adhesive.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
핵심 요약
Bonding quality depends on surface cleanliness and curing management; post-curing both removes bubbles and relieves stress, and is a standard process for bonded parts.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!