Processing Machinery
4 görüntüleme
PMMA Bonding Bubbles and Whitening
Sorun Belirtisi
Bonded products show bubbles and whitening at the bonding surface, and bonding strength is also affected.
Neden Analizi
Unclean bonding surfaces or improper operation seal air into the adhesive layer; rapid evaporation of the adhesive also causes whitening and bubbles.; During on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based on experience alone.
Çözüm
①Thoroughly clean the bonding surface; ②standardize glue application and lamination operation; ③post-cure at constant 60℃ for 2 hours after bonding; ④select a matching adhesive.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability.
Temel Çıkarım
Bonding quality depends on surface cleanliness and curing management; post-curing both removes bubbles and relieves stress, and is a standard process for bonded parts.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!