Extrusion & Post
11 조회수
Insufficient strength of PP woven bag flat filaments
문제 현상
Flat filaments break frequently in the drawing process, and the tensile strength of finished woven bags does not meet the standard.
원인 분석
Insufficient draw ratio makes the molecular orientation inadequate; the drawing temperature deviating from the optimal range also makes the strength build-up insufficient.; during on-site investigation, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
해결 방법
①Optimize the draw ratio to the process upper limit; ②control the drawing temperature; ③check the melt index matching of the raw material; ④test the linear density uniformity of the flat filaments.; after adjustment, continuously sample and verify the effect, and resume mass production after confirming stability
핵심 요약
Flat filament strength is built by drawing orientation; drawing process parameters are the core variables of drawing quality.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!