Processing Machinery
3 조회수
PPO Cushion 4-10mm Management
문제 현상
【Problem Phenomenon】PPO holding pressure feeding effect is unstable, and product sink marks and dimensions fluctuate
원인 분석
SABIC recommends cushion 4-10mm to ensure effective transmission of holding pressure; too small a cushion interrupts feeding, too large causes melt retention and increased heat history; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
해결 방법
Set cushion at 4-10mm and monitor repeatability; for sink mark parts, check whether the cushion is exhausted; regularly verify metering stability; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
핵심 요약
PPO cushion 4-10mm is the lifeline of holding pressure transmission; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!