Processing Machinery
6 visualizações
PPO Cushion 4-10mm Management
Fenómeno do problema
【Problem Phenomenon】PPO holding pressure feeding effect is unstable, and product sink marks and dimensions fluctuate
Análise das causas
SABIC recommends cushion 4-10mm to ensure effective transmission of holding pressure; too small a cushion interrupts feeding, too large causes melt retention and increased heat history; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
Solução
Set cushion at 4-10mm and monitor repeatability; for sink mark parts, check whether the cushion is exhausted; regularly verify metering stability; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
Conclusão principal
PPO cushion 4-10mm is the lifeline of holding pressure transmission; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!