Molds & Tooling
3 조회수
PPO Jetting Marks
문제 현상
[Problem Phenomenon] Snake-shaped jetting marks near the gate of PPO products, poor appearance
원인 분석
High-viscosity melt jets when passing through a small gate at high speed directly facing an empty cavity; the main cause is that the gate design does not guide the melt to hit the wall as soon as possible; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
Use overlap or fan gates to guide wall-following filling; arrange the gate facing the core; reduce the initial speed through the gate; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
핵심 요약
PPO jetting is radically cured by gate wall-hitting arrangement, and fan and overlap gates are preferred; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!