Injection Molding
6 조회수
PPSU injection speed fast
문제 현상
Improper PPSU injection speed; balance between fast speed requirements and defect risks.
원인 분석
PPSU recommends fast injection; high-viscosity material fast filling reduces flow front cooling; but too fast causes shear and air trap; multi-stage injection needs; structural adaptation.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
해결 방법
①Injection speed mainly fast; ②multi-stage curve optimization; ③shear and air trap monitoring; ④structural adaptation adjustment.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
PPSU fast injection is the official recommendation; multi-stage management prevents side effects; monitoring ensures quality.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!