Injection Molding
8 مشاهدة
PPSU injection speed fast
ظاهرة المشكلة
Improper PPSU injection speed; balance between fast speed requirements and defect risks.
تحليل الأسباب
PPSU recommends fast injection; high-viscosity material fast filling reduces flow front cooling; but too fast causes shear and air trap; multi-stage injection needs; structural adaptation.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
الحل
①Injection speed mainly fast; ②multi-stage curve optimization; ③shear and air trap monitoring; ④structural adaptation adjustment.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
PPSU fast injection is the official recommendation; multi-stage management prevents side effects; monitoring ensures quality.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!