Injection Molding
3 조회수
PVC Injection Product Peeling
문제 현상
Surface layer peeling, obvious at edges.
원인 분석
Mixing contamination, poor plasticization causing poor interlayer bonding, excessive release agent; when PVC plasticization is poor, interlayer fusion is poor; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based solely on experience.
해결 방법
①Check mixing and contamination, standardize raw material and regrind storage management; ②Improve plasticization quality, eliminate unplasticized particles; ③Control release agent dosage, avoid forming isolation layer on surface; ④Thoroughly purge, remove accumulated material in barrel and hot runner dead corners; ⑤Stabilize melt temperature curve, avoid quality drift caused by temperature fluctuation.
핵심 요약
PVC peeling = 'contamination and plasticization': interlayer non-fusion caused by poor PVC plasticization is its characteristic; first check contamination then grasp plasticization, release agent dosage must also be controlled.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!