Processing Machinery
4 조회수
TPU screw slipping
문제 현상
During plasticization the screw slips and does not feed material, and output drops sharply.
원인 분석
Fault or bridging at the hopper feeding position; too high temperature at the rear of the barrel softens and sticks the pellets; too fast screw retreat speed also causes slipping; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
해결 방법
①remove obstacles at the feeding position; ②reduce the temperature at the rear of the barrel; ③reduce the screw retreat speed; ④check pellet shape and drying state; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
핵심 요약
Screw slipping is a physical feeding obstacle; feed zone temperature management is the key to preventing TPU slipping; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!