Processing Machinery
6 مشاهدة
TPU screw slipping
ظاهرة المشكلة
During plasticization the screw slips and does not feed material, and output drops sharply.
تحليل الأسباب
Fault or bridging at the hopper feeding position; too high temperature at the rear of the barrel softens and sticks the pellets; too fast screw retreat speed also causes slipping; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
الحل
①remove obstacles at the feeding position; ②reduce the temperature at the rear of the barrel; ③reduce the screw retreat speed; ④check pellet shape and drying state; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Screw slipping is a physical feeding obstacle; feed zone temperature management is the key to preventing TPU slipping; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!