Injection Molding
5 조회수
Warpage in PVA '2079851475616104452
문제 현상
After demolding, PVA injection molded products warp 2-3mm/100mm, flatness not up to standard
원인 분석
PVA shrinkage large and mold temperature uneven, causing directional shrinkage differences; gate position improper, flow orientation stress released unevenly; cooling time insufficient
해결 방법
1) Increase mold temperature to 40-60°C to reduce temperature difference; 2) Increase holding pressure to 50-70MPa; 3) Optimize gate position for uniform flow; 4) Extend cooling time; 5) Annealing treatment to release residual stress
핵심 요약
Warpage is caused by shrinkage difference and orientation stress; uniform mold temperature and holding are key
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!