Molds & Tooling
4 조회수
PVA angle deviation
문제 현상
PVA product angle deviation >1°, exceeding the ±0.5° tolerance
원인 분석
Uneven shrinkage causes angle change; mold angle design did not consider PVA shrinkage compensation; product deformation during demolding
해결 방법
1) Mold angle pre-compensation for the PVA shrinkage rate; 2) Extend cooling time to ensure setting before demolding; 3) Uniform cooling to reduce shrinkage differences
핵심 요약
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is the key
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!