Molds & Tooling
6 مشاهدة
PVA angle deviation
ظاهرة المشكلة
PVA product angle deviation >1°, exceeding the ±0.5° tolerance
تحليل الأسباب
Uneven shrinkage causes angle change; mold angle design did not consider PVA shrinkage compensation; product deformation during demolding
الحل
1) Mold angle pre-compensation for the PVA shrinkage rate; 2) Extend cooling time to ensure setting before demolding; 3) Uniform cooling to reduce shrinkage differences
الخلاصة الأساسية
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is the key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!