Injection Molding
3 조회수
Glass Fibre '2079851475616104452 sink marks
문제 현상
Glass Fibre injection molded product thick-wall region surface depression 0.2-0.5mm, sink marks
원인 분석
Holding pressure insufficient or holding time short; gate freezes too early, holding pressure cannot be transmitted; wall thickness difference large, after thin wall freezes thick wall cannot be fed
해결 방법
1) Raise holding pressure 70-90MPa; 2) extend holding to gate freezing +2s; 3) product design reduces wall thickness difference with gradual transition; 4) add supplementary gate in thick-wall region
핵심 요약
Sink is caused by insufficient holding and wall thickness difference; high-pressure holding and multiple gates are core countermeasures
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!