Injection Molding
7 조회수
POE '2079851475616104452 flow length ratio insufficient
문제 현상
POE '2079851475616104452 flow length ratio only 80-100, below 150, thin-walled products cannot be filled
원인 분석
POE melt viscosity high, flow distance short; injection temperature too low; injection pressure insufficient; mold runner resistance large
해결 방법
1) Raise injection temperature to 160-200°C; 2) Raise injection pressure 80-100MPa; 3) Enlarge runner and gate size to reduce resistance; 4) Add 0.3-0.5wt% flow aid to reduce viscosity
핵심 요약
Insufficient flow length ratio is caused by high POE viscosity; high temperature, high pressure and large gate are key
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!