Material Analysis
4 조회수
Substandard Mechanical Properties of High-Density Polyethylene Extruded Products
문제 현상
The tensile strength, impact strength, or pressure resistance of the product is lower than the standard requirement.
Substandard mechanical properties directly affect the safety of product use, and are especially important in pipes and structural products.
원인 분석
（1）Raw material degradation leads to reduced molecular weight
（2）The plasticization is uneven, and there are unmelted particles in the melt
（3）The cooling rate is improper, and the crystallinity is unsuitable
（4）The product wall thickness is insufficient or there are bubbles
（5）The regrind ratio is too high
해결 방법
（1）Control the barrel temperature within the 180-260°C range to avoid overheating degradation
（2）Optimize the screw design and rotation speed to ensure sufficient plasticization
（3）Adjust the cooling conditions to ensure suitable crystallinity
（4）Check the product wall thickness and internal quality to eliminate bubbles
（5）Control the regrind ratio to no more than 20%
핵심 요약
Substandard mechanical properties are caused by material degradation or poor processing quality, and need to be solved from temperature control and plasticization quality.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!