Material Analysis
7 visualizações
Substandard Mechanical Properties of High-Density Polyethylene Extruded Products
Fenómeno do problema
The tensile strength, impact strength, or pressure resistance of the product is lower than the standard requirement.
Substandard mechanical properties directly affect the safety of product use, and are especially important in pipes and structural products.
Análise das causas
（1）Raw material degradation leads to reduced molecular weight
（2）The plasticization is uneven, and there are unmelted particles in the melt
（3）The cooling rate is improper, and the crystallinity is unsuitable
（4）The product wall thickness is insufficient or there are bubbles
（5）The regrind ratio is too high
Solução
（1）Control the barrel temperature within the 180-260°C range to avoid overheating degradation
（2）Optimize the screw design and rotation speed to ensure sufficient plasticization
（3）Adjust the cooling conditions to ensure suitable crystallinity
（4）Check the product wall thickness and internal quality to eliminate bubbles
（5）Control the regrind ratio to no more than 20%
Conclusão principal
Substandard mechanical properties are caused by material degradation or poor processing quality, and need to be solved from temperature control and plasticization quality.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!