Processing Machinery
4 조회수
Mechanical properties of heat-resistant polyethylene extruded products not meeting standard (Variant: strengthened measures)
문제 현상
The tensile strength, impact strength or pressure resistance of the product is lower than the standard requirements.
Failure of mechanical properties to meet standards directly affects product use safety, especially in pipes and structural products.
Especially on the original basis, additional attention is needed, and this problem is more prominent and requires key attention.
원인 분석
(1) Raw material degradation causes molecular weight reduction
(2) Plasticization uneven, unmelted particles in the melt
(3) Improper cooling rate, unsuitable crystallinity
(4) Product wall thickness insufficient or has bubbles
(5) Regrind ratio too high
(6) On the original basis, additional attention is needed: process parameter fluctuations or equipment state changes aggravate this problem
해결 방법
(1) Control barrel temperature within 190-230°C to avoid overheating degradation
(2) Optimize screw design and rotation speed to ensure full plasticization
(3) Adjust cooling conditions to ensure suitable crystallinity
(4) Check product wall thickness and internal quality, eliminate bubbles
(5) Control regrind ratio not exceeding 20%
(6) And strengthen process monitoring; on the original basis, additional attention is needed, paying special attention to parameter stability
핵심 요약
Failure of mechanical properties to meet standards is caused by material degradation or poor processing quality, and needs to be solved from temperature control and plasticizing quality.
Targeted preventive measures need to be taken in different production scenarios.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!