Processing Machinery
7 visualizações
Mechanical properties of heat-resistant polyethylene extruded products not meeting standard (Variant: strengthened measures)
Fenómeno do problema
The tensile strength, impact strength or pressure resistance of the product is lower than the standard requirements.
Failure of mechanical properties to meet standards directly affects product use safety, especially in pipes and structural products.
Especially on the original basis, additional attention is needed, and this problem is more prominent and requires key attention.
Análise das causas
(1) Raw material degradation causes molecular weight reduction
(2) Plasticization uneven, unmelted particles in the melt
(3) Improper cooling rate, unsuitable crystallinity
(4) Product wall thickness insufficient or has bubbles
(5) Regrind ratio too high
(6) On the original basis, additional attention is needed: process parameter fluctuations or equipment state changes aggravate this problem
Solução
(1) Control barrel temperature within 190-230°C to avoid overheating degradation
(2) Optimize screw design and rotation speed to ensure full plasticization
(3) Adjust cooling conditions to ensure suitable crystallinity
(4) Check product wall thickness and internal quality, eliminate bubbles
(5) Control regrind ratio not exceeding 20%
(6) And strengthen process monitoring; on the original basis, additional attention is needed, paying special attention to parameter stability
Conclusão principal
Failure of mechanical properties to meet standards is caused by material degradation or poor processing quality, and needs to be solved from temperature control and plasticizing quality.
Targeted preventive measures need to be taken in different production scenarios.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!