Extrusion & Post
4 조회수
PET extrusion output fluctuation and surging
문제 현상
PET extruder output fluctuates periodically, accompanied by pressure fluctuation and current swing.
원인 분석
Feed zone temperature too high, material melts prematurely and wraps the screw (bridging), screw design unsuitable for PET (improper compression ratio), poor feeding.
해결 방법
Reduce feed zone temperature (water cooling 60-80°C); use PET dedicated screw (compression ratio 2.5-3.0:1); check feeding.
핵심 요약
PET extrusion surging is often caused by feed zone problems; screw design and temperature control are fundamental.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!