Injection Molding
4 조회수
Gate clogging of PET injection mold
문제 현상
The gate frequently clogs during PET '2079851475616104452, injection pressure rises abnormally, and production is interrupted.
원인 분석
PET cools, crystallizes and solidifies too fast at the gate; gate size is too small; mold temperature in the gate area is on the low side.
해결 방법
Increase gate size; increase mold temperature in the gate area to 140-160°C; use a hot runner system.
핵심 요약
The fast crystallization characteristic of PET easily causes gate clogging and needs to be addressed through mold temperature and gate design.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!