Product Delamination (Multiple Feeding Process)

In the rotational molding production process, the product exhibits the quality defect of 「Product Delamination (Multiple Feeding Process)」. The specific manifestation is that separation occurs between layers of products made with multiple feeding. This defect is relatively common when processing powder materials such as LLDPE, HDPE, PVC, and PA, and its occurrence conditions are usually related to unreasonable settings of heating temperature and time, rotation speed ratio, cooling rate, and mold wall thickness. When the Product Delamination (Multiple Feeding Process) situation is severe, it will cause a series of chain quality defects in the product in terms of appearance, dimensional accuracy, and mechanical properties, which not only reduces the product's use functionality and safety, but also directly increases the scrap rate and production cost. Therefore, this problem needs to be systematically diagnosed and optimized from multiple dimensions such as material selection, the rotational molding machine, the heating oven, the rotating arm, the cooling station status, and heating temperature and time, rotation speed ratio, cooling rate, and mold wall thickness.

1. Mismatched interlayer sintering temperature. Temperature is the core factor affecting melt fluidity and viscosity. Too high a temperature setting will cause the melt viscosity to decrease, insufficient melt strength, or even thermal degradation; too low a temperature will result in poor melt fluidity and insufficient plasticization, making it unable to fill or mold smoothly. A reasonable temperature window should be optimized and determined within the recommended range according to the melting characteristics and thermal stability of the material. 2. Poor interlayer bonding. This factor leading to the problem reflects that certain process conditions or material properties in rotational '2079851475616104453ing have not met the optimal molding requirements. Such problems are often cumulative and hidden, and should be investigated and verified as key focus items during process debugging and finalization to ensure that hidden dangers are eliminated from the source. In addition, insufficient overall coordination of powder melting uniformity and product wall thickness control is also a factor that cannot be ignored. There are complex interactions and coupling relationships among various process parameters, and the deviation of any parameter may aggravate the degree of Product Delamination (Multiple Feeding Process) through chain effects. In terms of equipment maintenance, the regular overhaul and accuracy confirmation of the rotational molding machine, heating oven, rotating arm, and cooling station are not in place, causing the actual operating parameters of the equipment to deviate from process requirements, which will also become a potential inducement of the Product Delamination (Multiple Feeding Process) problem.

1. Optimize the temperature and time of each feeding. Optimization work needs to be based on accurate diagnosis of the root cause of the problem, and blind attempts should be avoided. It is recommended to first determine the key influencing factors and their interactions through process DOE test methods or historical production data analysis, and then carry out targeted parameter optimization and structural improvement to achieve twice the result with half the effort. 2. Ensure full melting and bonding between layers. Before implementing this measure, its feasibility and expected effects should be fully evaluated, and the plan details should be communicated and confirmed with relevant technical personnel. During implementation, key quality indicator changes should be closely monitored, and adjustment effects should be recorded and fed back in time to form reusable process experience. It is recommended to formulate a preventive inspection checklist for the Product Delamination (Multiple Feeding Process) problem, incorporate powder melting uniformity and product wall thickness control into the scope of daily patrol inspections, and conduct online monitoring of key parameters through the SPC statistical process control method to achieve early warning and rapid response to problems. In terms of material management, incoming inspection of raw materials and in-process inspection of work-in-progress products should be strengthened, and the key performance indicators of powder materials such as LLDPE, HDPE, PVC, and PA should be strictly controlled to ensure the stability of molding quality from the source.

In summary, the causes of the 「Product Delamination (Multiple Feeding Process)」 problem can be attributed to the combined effects of multiple factors such as mismatched interlayer sintering temperature and poor interlayer bonding. To solve this problem, it is necessary to start from aspects such as optimizing the temperature and time of each feeding and ensuring full melting and bonding between layers and take systematic treatment measures. In actual production, it is recommended to establish a prevention and rapid response mechanism for this problem, and achieve stable production and continuous improvement through powder melting uniformity and product wall thickness control.