Processing Machinery
7 visualizações
ABS melt temperature upper limit 280°C
Fenómeno do problema
[Problem phenomenon] Continuously increasing temperature to improve filling, ABS products discolor and develop black specks
Análise das causas
ABS melt temperature exceeding 280°C triggers thermal decomposition of the butadiene phase, releasing smoke and forming black speck carbonization; discoloration and black specks are direct signals of overtemperature; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blind machine adjustment based solely on experience
Solução
Melt temperature strictly ≤280°C, normal 230-270°C; reduce temperature by 10-15°C upon discoloration; thoroughly clean overtemperature material; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusão principal
ABS melt temperature 280°C is the decomposition red line, discoloration is an alarm; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!