Material Drying
7 visualizações
ABS bubble
Fenómeno do problema
[Problem Phenomenon] ABS product internal bubbles, strength affected
Análise das causas
Three types: moisture vaporization, degradation gas generation, thick-wall shrinkage void; locate by distribution classification; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry materials and should be confirmed first during troubleshooting
Solução
Moisture type strengthen drying; degradation type lower temperature and shorten residence; shrinkage void type strengthen holding pressure; after adjustment, continuously sample to verify the effect, resume mass production only after confirming stability; change only one variable each time and record parameter changes to facilitate locating effective measures
Conclusão principal
ABS bubbles are divided into three types, distribution points to the cause; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems later
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!