Molds & Tooling
7 visualizações
HDPE hot runner temperature
Fenómeno do problema
Serious stringing at the gate of the HDPE hot runner mold
Análise das causas
The hot runner temperature is too high, making the melt viscosity low and causing gate stringing; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
Calibrate the hot runner temperature; appropriately lower the temperature in the gate area; clean regularly; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, to facilitate locating effective measures
Conclusão principal
HDPE hot runner stringing relies on gate temperature control; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar future problems
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!