Material Analysis
14 visualizações
Treatment of PA12 SLS Unsintered Powder
Fenómeno do problema
【Problem phenomenon】About 70% of the powder in each furnace was unsintered, and direct reuse had poor fluidity affecting powder spreading quality
Análise das causas
Unsintered powder undergoes long-term thermal stress and its fluidity is damaged, and repeated reuse makes quality uncontrollable; research shows that chemical additives can be used to break amide bonds and directionally restore fluidity, achieving powder regeneration
Solução
Establish an evaluation of the degree of powder thermal aging; blend powder with poor fluidity with new powder in proportion or treat it with chemical regeneration; include powder spreading quality in the first-layer inspection of each furnace; after adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
70% unsintered powder is the bulk of the cost, and fluidity evaluation determines the reuse method; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!