Molds & Tooling
6 visualizações
PA66 short shot comprehensive troubleshooting
Fenómeno do problema
PA66 thin-wall parts have intermittent short shots, good and bad with parameters unchanged
Análise das causas
Short shot causes are many: poor venting, melt temperature fluctuation, mold temperature drift, non-return ring wear and leakage, intermittency points to equipment state fluctuation; during on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based only on experience
Solução
Investigate in the order of venting, temperature, non-return ring, and nozzle; detect non-return ring clearance; appropriately widen the process window; after adjustment, take continuous samples to verify the effect, confirm stability before resuming mass production
Conclusão principal
For intermittent short shots, focus on checking equipment state rather than process parameters; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!