Material Drying
7 visualizações
PA6 Dehumidifying Dryer Selection
Fenómeno do problema
PA6 '2079851475616104452 dried in an ordinary hot-air oven still shows silver streaks and bubbles; after switching to a dehumidifying dryer, the defects disappear
Análise das causas
PA6 is highly hygroscopic with a high equilibrium moisture content; ordinary hot-air ovens rely on heating ambient air, and when the air humidity is high, the moisture content cannot be reduced below 0.2%; only a dehumidifying dryer providing low-dew-point dry air can achieve deep dehydration
Solução
Where a moisture content below 0.2% is required, a dehumidifying dryer must be selected, requiring a dew point below -40°C; hot-air ovens are only suitable for preliminary pre-drying in dry ambient seasons and cannot be used as a formal drying means
Conclusão principal
The core of PA6 drying equipment selection is the dew point rather than the temperature, and the dehumidifying dryer is the standard configuration; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!