Extrusion & Post
7 visualizações
PBAT melt index too high and blown film unstable
Fenómeno do problema
PBAT melt flow index is too high (>15g/10min), the blown film bubble is unstable, and thickness fluctuation is large.
Análise das causas
PBAT molecular weight is low or degradation causes the melt index to be too high; flowability too good makes the film bubble difficult to shape; melt strength and flowability are unbalanced; recycled material blending reduces molecular weight.
Solução
①Select a grade with moderate melt index; ②chain extender to increase molecular weight and reduce melt index; ③control processing temperature to prevent degradation; ④limit recycled material proportion.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusão principal
PBAT melt index management is the prerequisite for blown film stability; chain extender is the adjustment means; degradation prevention starts from the source.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!