Material Drying
7 visualizações
PC Weld Line Bubbles
Fenómeno do problema
[Problem Phenomenon] Bubbles gather at the PC weld lines
Análise das causas
Confluence entrapping air plus the venting end effect; more obvious when the moisture is not fully removed; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
Strengthen venting in the weld line area; drying up to standard; optimize the confluence position; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
Conclusão principal
For PC weld line bubbles, check venting and drying; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!