Injection Molding
2 visualizações
PC Glass Fiber Exposure
Fenómeno do problema
[Problem Phenomenon] Glass fiber PC surface has floating fibers and is rough
Análise das causas
Fibers enrich the surface; low melt temperature, mold temperature and slow injection speed cause poor coverage; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
Increase the melt temperature and mold temperature; increase the injection speed; mold polishing; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes, so as to locate effective measures
Conclusão principal
For PC floating fibers, raise the temperature, speed and pressure, with polishing as an aid; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!