Extrusion & Post
7 visualizações
PE Film Blocking and Poor Opening
Fenómeno do problema
Two layers of the film roll stick together, bag opening is difficult, white marks appear when torn apart, and the machine runs poorly on high-speed bag making machines.
Análise das causas
PE film slip/anti-blocking agents are insufficient or insufficiently bloomed out; excessive winding tension, high film temperature and high storage temperature all aggravate blocking; LDPE/LLDPE film surfaces are more tacky and more prone to blocking.
Solução
①Add/adjust the anti-blocking agent (silica type) and slip agent (erucamide type) as needed; ②reduce the winding tension; ③wind only after the bubble is fully cooled; ④control the warehouse temperature and first-in-first-out; ⑤balance the slip against subsequent printing and lamination conflicts according to the application.
Conclusão principal
Film blocking = three controls of 'additive + tension + temperature': additives manage the surface, tension manages the contact pressure, temperature manages blooming and creep; too much slip agent affects lamination, and the dosage must be carefully balanced according to the final application.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!