Processing Machinery
6 visualizações
PEEK L/D Ratio Screw Adaptation
Fenómeno do problema
【Problem Phenomenon】Large thin-walled complex PEEK parts have uneven plasticizing and difficult filling, and general-purpose screws are inadequate
Análise das causas
Large thin-walled complex parts require a high L/D ratio screw with a short compression section to provide sufficient plasticizing capacity and stable conveying; standard screws have insufficient plasticizing reserve in high-viscosity PEEK thin-wall flow paths
Solução
Select a high L/D short-compression screw for large thin-walled complex parts; for filled grades, the screw also takes wear resistance into account; when plasticizing is insufficient, first check the screw configuration adaptability; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
Conclusão principal
For complex PEEK parts, first check the screw L/D and compression section; if the configuration is wrong, machine adjustment is futile; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!