Extrusion & Post
14 visualizações
PLA blown film bubble instability
Fenómeno do problema
PLA blown film bubbles are easy to break and hard to stabilize.
Análise das causas
PLA has low melt strength; the narrow processing window makes bubble control difficult.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
① Add chain extenders to increase melt strength; ② blend with other polymers; ③ reduce the blow-up ratio; ④ stabilize cooling.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusão principal
PLA blown film requires melt strength modification; long-chain branching agents and blending are effective means.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!