Extrusion & Post
13 visualizações
PLA 3D Printing Interlayer Strength
Fenómeno do problema
Weak interlayer bonding of printed parts.
Análise das causas
Insufficient interlayer temperature causes poor fusion; too-fast cooling affects interlayer diffusion.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
Solução
①Increase nozzle temperature; ②Reduce the cooling fan; ③Reduce layer height; ④Optimize printing speed.; After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Interlayer strength relies on the balance of temperature and cooling.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!