Processing Machinery
6 visualizações
Holding Pressure Management of PLA Products
Fenómeno do problema
Sink marks and internal stress coexist.
Análise das causas
Improper holding pressure; PLA solidification behavior is special.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry literature and should be confirmed first during troubleshooting
Solução
①Optimize holding pressure and time; ②Set according to solidification; ③Staged holding pressure; ④Verify the balance.; After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Holding pressure should be set according to PLA solidification characteristics.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!