Processing Machinery
6 visualizações
PMMA Display Stand Bonding
Fenómeno do problema
Display stands crack at bonded joints, deform after load-bearing assembly, and receive complaints after delivery
Análise das causas
Display stand bonding strength depends on surface cleanliness and adhesive curing; load-bearing assembly stress superimposes on the bonding interface; solvent bonding induces cracks when sheet stress has not been relieved; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Solução
①Clean the bonding surface and anneal as pretreatment; ②verify load-bearing structure calculations and add mechanical fixing assistance; ③fully cure after bonding before assembly; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
Conclusão principal
The structural safety of PMMA display stands relies on bonding plus mechanical double insurance; annealing and cleaning are prerequisites for bonding quality; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!