Molds & Tooling
7 visualizações
POM Glass Fiber Reinforced Deformation
Fenómeno do problema
Glass fiber reinforced POM parts warp, with poor dimensional accuracy, surface floating fibers, and poor gloss
Análise das causas
Glass fiber orientation anisotropy causes warpage; fibers floating to the surface form floating fibers; reinforced grades have lower shrinkage but stronger directionality, and mold margin must be corrected by grade
Solução
①Control fiber orientation via gate position; ②raise mold temperature to improve surface replication; ③correct mold shrinkage margin according to reinforced grade data; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Glass fiber POM trades directionality for strength; orientation design and shrinkage correction are required courses at the mold stage; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!