Molds & Tooling
7 visualizações
Mold sticking and scratching of PP products
Fenómeno do problema
The product adheres to the core and is scratched during demolding, prominent in deep-cavity parts.
Análise das causas
Low mold temperature makes PP grip the core tightly; insufficient draft angle or rough surface increases the demolding resistance.; during on-site investigation, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Solução
①Appropriately increase the mold temperature; ②increase the draft angle; ③polish the cavity; ④balance the ejection system.; after adjustment, continuously sample and verify the effect, and resume mass production after confirming stability
Conclusão principal
Mold sticking is solved from both the gripping force and the demolding structure; draft angle and polishing are the design guarantee.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!