Molds & Tooling
7 visualizações
PPS product ejection whitening
Fenómeno do problema
Whitening at the ejection position.
Análise das causas
Concentrated ejection force; the strength state of high-temperature material during demolding is special.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
①Increase ejection area; ②sufficient cooling and setting; ③balanced ejection; ④ensure draft angle.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Conclusão principal
Ejection whitening is a stress signal; ejection system optimization.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!