Injection Molding
7 visualizações
PP Glass Fiber Exposure
Fenómeno do problema
【Problem Phenomenon】Glass fiber PP surface has floating fibers and is rough
Análise das causas
Fibers enrich the surface; low melt temperature, mold temperature and slow injection speed cause poor coverage; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Solução
Increase melt temperature and mold temperature; increase injection speed; mold polishing; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
Conclusão principal
For PP floating fibers increase temperature, speed and pressure, polishing assists; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!