Injection Molding
6 visualizações
EVOH injection product has oil spots
Fenómeno do problema
Oil spots appear on the surface of EVOH injection molded products after demolding, release agent residue or lubricant precipitation
Análise das causas
Release agent sprayed too much or unevenly distributed; internal lubricant stearic acid type in EVOH precipitates to the surface; mold lubricating oil seeping into the cavity
Solução
1) Reduce release agent dosage or switch to dry-film release agent; 2) Use internal lubricant to replace external release agent; 3) Seal mold lubrication parts to prevent oil from seeping into the cavity; 4) Clean the product surface to remove oil spots and then test to identify the source
Conclusão principal
Oil spots are caused by external sources of release agent and lubricant; reducing release agent and sealing mold lubrication are key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!