Molds & Tooling
7 visualizações
Insufficient flatness of PU
Fenómeno do problema
Flatness of PU flat products >0.5mm/100mm, warpage
Análise das causas
PU shrinkage large and different in each direction; mold cooling uneven; residual stress release causing continuous warpage
Solução
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage difference; 3) Annealing to release residual stress
Conclusão principal
Insufficient flatness is caused by shrinkage difference and stress; uniform cooling and annealing are key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!