Extrusion & Post
13 visualizações
Material Overflow at CMC Vacuum Vent Section
Fenómeno do problema
Material overflows at the vacuum vent section during CMC extrusion, clogging the vent hole
Análise das causas
CMC melt viscosity is low and overflows at the vacuum section; vacuum section temperature is high and viscosity is lower, aggravating overflow; vent hole design is improper
Solução
1)Lower vacuum section temperature by 5-10°C to increase viscosity; 2)Add a baffle above the vent hole to prevent overflow; 3)Increase screw speed to accelerate conveying and reduce residence
Conclusão principal
Overflow is caused by low melt viscosity; temperature reduction and baffle are the key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!