Extrusion & Post
7 visualizações
material waste Occurring in the die discharge Stage of Biaxially oriented polypropylene film
Fenómeno do problema
material waste occurs in the film during the die discharge stage, affecting production stability and product quality.
Biaxially oriented polypropylene film is sensitive to the process parameters of this stage.
Análise das causas
(1) The process parameters of the die discharge stage are set improperly
(2) The equipment condition or precision is insufficient
(3) Raw material characteristics (biaxial stretching, longitudinal and transverse stretch ratio control, high stiffness, good transparency) cause processing difficulties
(4) The environmental conditions (temperature and humidity) are unsuitable
(5) Improper operation or inadequate monitoring
Solução
(1) Optimize the process parameters of the die discharge stage, and control the temperature within the range of 140-170(stretching)/230-260(extrusion)°C
(2) Check and maintain the equipment to ensure operating precision
(3) Select processing process parameters suitable for biaxially oriented polypropylene film
(4) Control the temperature and humidity of the production environment
(5) Strengthen operation training and process monitoring
Conclusão principal
The process parameters of each stage of film production need to be precisely controlled; equipment condition and raw material quality are the foundation.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!