Extrusion & Post
14 visualizações
Unstable cooling line height of polyolefin plastomer films
Fenómeno do problema
The cooling line (frost line) height of the blown film fluctuates greatly, and the film thickness and quality are unstable.
The cooling line height reflects the stability of cooling conditions and directly affects film performance.
Análise das causas
（1）The air volume or air speed of the air ring is unstable
（2）The extrusion temperature fluctuates
（3）Ambient airflow interference
（4）The screw speed fluctuates
（5）The cooling air temperature fluctuates
Solução
（1）Check the air ring fan and valve to ensure stable air volume
（2）Stabilize the extrusion temperature, with the fluctuation controlled within ±3°C (180-230°C range)
（3）Install wind shields or isolation curtains to reduce ambient airflow interference
（4）Stabilize the screw speed
（5）Use constant temperature cooling air to reduce temperature fluctuation
Conclusão principal
Unstable cooling line is caused by fluctuations in cooling or extrusion conditions, and the air ring parameters and environmental conditions need to be stabilized.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!