Extrusion & Post
14 visualizações
Dimensional fluctuation of random copolymer polypropylene pipe special material extruded products (Variant: strengthened measures)
Fenómeno do problema
The outer diameter, wall thickness, or width of the extruded product fluctuates periodically or randomly in the longitudinal direction.
Dimensional fluctuation affects the fitting accuracy and use performance of the product, and is common in pipe and profile extrusion.
In particular, extra attention is needed on the original basis, this problem is more prominent and needs key attention.
Análise das causas
（1）The screw speed is unstable, and the output fluctuates
（2）The haul-off speed is unstable and does not match the extrusion speed
（3）The barrel temperature fluctuates greatly, and the melt viscosity changes
（4）The raw material feeding is uneven, and the feeding fluctuates
（5）The cooling water temperature or flow rate fluctuates
（6）On the original basis, extra attention is needed: process parameter fluctuations or equipment status changes have aggravated this problem
Solução
（1）Check the extruder drive system and stabilize the screw speed
（2）Check the haul-off machine speed control system to ensure stable haul-off speed
（3）Stabilize the barrel temperature, and control the fluctuation within ±3°C (within the range of 200-220°C)
（4）Check the hopper feeding to ensure continuous and uniform feeding
（5）Stabilize the cooling water temperature and flow rate, and add a constant temperature device if necessary
（6）And strengthen process monitoring; on the original basis, extra attention is needed, with special attention to parameter stability
Conclusão principal
Dimensional fluctuation is caused by unstable extrusion or haul-off, and each process parameter needs to be systematically stabilized.
In different production scenarios, targeted preventive measures need to be taken.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!