Injection Molding
14 visualizações
Abnormal In-Mold Pressure Curve in PBT '2079851475616104452
Fenómeno do problema
The in-mold pressure sensor curve shows an abnormal shape (double peaks or multiple peaks), and the filling is unstable.
Análise das causas
During multi-gate filling, the arrival times of the melt streams are different, producing pressure fluctuations; cold material entering the cavity causes this.
Solução
Optimize the runner balance; increase the melt temperature and mold temperature; use a cold slug well to capture cold material.
Conclusão principal
The PBT in-mold pressure curve is the basis for filling quality diagnosis.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!