Injection Molding
14 visualizações
Large shrinkage rate fluctuation of PET injection parts
Fenómeno do problema
Unstable dimensions of PET injection products, shrinkage rate fluctuates between 0.2%-0.8%, affecting assembly accuracy.
Análise das causas
Insufficient holding pressure and holding time, mold temperature fluctuation causes crystallinity differences, uneven cooling rate, material IV value differences.
Solução
Increase holding pressure to 60-80% of injection pressure, extend holding until gate solidification; stabilize mold temperature ±2°C; control IV value 0.75-0.85dL/g.
Conclusão principal
PET shrinkage rate is dominated by crystallinity and holding pressure; process stability is the guarantee of dimensional accuracy.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!